Invisiware Receiver
For a smooth and sleek look, termination hardware can be hidden in the posts. Scroll down to view a chart that will showcase the different swaging stud and receiver dimensions and part numbers.
For specific questions, contact Jack Blair at (832) 928-9655.
These invisiware receivers are used for 1/8 and 3/16 cable.
These invisiware receivers are used for 1/4 cable.
These invisiware receivers are used for 5/16 and 3/8 cable.
The images below are from Starbucks and Southwest Airlines respectively.
The images below are at the Dallas Arboretum.
The image below is at the Dallas Arboretum.
Fabrication Guides Charts
Fabrication Guide 1/8 Cable
Click on the part number to see that specific information.
Fabrication Guide 3/16 Cable
Click on the part number to see that specific information.
Fabrication Guide 1/4 Cable
Click on the part number to see that specific information.
Fabrication Guide 5/16 Cable
Click on the part number to see that specific information.
Fabrication Guide 3/8 Cable
Click on the part number to see that specific information.
Typical Negative Adjustment
Negative Adjustment for 1/8 Cable
1/8 CABLE
| Part | Receiver Length | Typical Negative Adjustment per Receiver |
| 18BC-R612 | 1.56 | 5/32” (.1563) |
| 18BC-R622 | 1.81 | 13/32” (.4063) |
| 18BC-R632 | 2.03 | 5/8” (.625) |
| 18BC-R642 | 2.3 | 29/32” (.9063) |
| 18BC-R672 | 2.405 | 1” |
| 18BC-R682 | 2.53 | 1-3/32” (1.0938) |
| 18BC-R652 | 3.03 | 1-5/8” (1.625) |
| 18BC-R662 | 3.5625 | 1-3/8” (1.375) |
**Negative Adjustment is when swaging stud is sunk completely into, and flush with end of receiver till the receiver bottoms out onto the cable.
| Recommend Longest Run For 1/8 Cable | |
| 18BC-R612 | 10ft |
| 18BC-R622 | 25ft |
| 18BC-R632 | 40ft |
| 18BC-R642 | 50ft |
| 18BC-R672 | 50ft |
| 18BC-R682 | 60ft |
| 18BC-R652 | 60ft |
| 18BC-R662 | 60ft |
If using a Cable Pre-Tensioner and swaging one side in the field you should be able to double the length of the cable span.
Negative Adjustment for 3/16 Cable
3/16 CABLE
| Part | Receiver Length | Typical Negative Adjustment per Receiver |
| 316BC-R612 | 1.56 | 5/32” (.1563) |
| 316BC-R622 | 1.81 | 13/32” (.4063) |
| 316BC-R632 | 2.03 | 5/8” (.625) |
| 316BC-R642 | 2.3 | 29/32” (.9063) |
| 316BC-R672 | 2.405 | 1” |
| 316BC-R682 | 2.53 | 1-3/32” (1.0938) |
| 316BC-R652 | 3.03 | 1-5/8” (1.625) |
| 316BC-R662 | 3.5625 | 1-3/8” (1.375) |
**Negative Adjustment is when swaging stud is sunk completely into, and flush with end of receiver till the receiver bottoms out onto the cable.
| Recommend Longest Run For 3/16 Cable | |
| 316BC-R612 | 10ft |
| 316BC-R622 | 25ft |
| 316BC-R632 | 40ft |
| 316BC-R642 | 50ft |
| 316BC-R672 | 50ft |
| 316BC-R682 | 60ft |
| 316BC-R652 | 60ft |
| 316BC-R662 | 60ft |
If using a Cable Pre-Tensioner and swaging one side in the field you should be able to double the length of the cable span.
Negative Adjustment for 1/4 Cable
1/4 CABLE
| Part | Receiver Length | Typical Negative Adjustment per Receiver |
| 14BC-R822 | 1.81 | 1/8” (.125) |
| 14BC-R832 | 2.03 | 11/32” (.3438) |
| 14BC-R842 | 2.3 | 19/32” (.5939) |
| 14BC-R852 | 3.03 | 1-11/32” (1.3438) |
**Negative Adjustment is when swaging stud is sunk completely into, and flush with end of receiver till the receiver bottoms out onto the cable.
| Recommend Longest Run For 1/4 Cable | |
| 14BC-R822 | 10ft |
| 14BC-R832 | 25ft |
| 14BC-R842 | 40ft |
| 14BC-R852 | 60ft |
If using a Cable Pre-Tensioner and swaging one side in the field you should be able to double the length of the cable span.
Negative Adjustment for 5/16 Cable
5/16 CABLE
| Part | Receiver Length | Typical Negative Adjustment per Receiver |
| 516BC-R1232 | 2.03 | 9/32” (.2813) |
| 516BC-R1242 | 2.3 | 17/32” (.5213) |
| 516BC-R1252 | 3.03 | 1-9/32” (1.2813) |
**Negative Adjustment is when the swaging stud is sunk completely into, and flush with the end of receiver till the receiver bottoms out onto the cable.
| Recommend Longest Run For 5/16 Cable | |
| 516BC-R1232 | 15ft |
| 516BC-R1242 | 40ft |
| 516BC-R1252 | 60ft |
If using a Cable Pre-Tensioner and swaging one side in the field you should be able to double the length of the cable span.
Negative Adjustment for 3/8 Cable
3/8 CABLE
| Part | Receiver Length | Typical Negative Adjustment per Receiver |
| 38BC-R1232 | 2.03 | 9/32” (.2813) |
| 38BC-R1242 | 2.3 | 17/32” (.5213) |
| 38BC-R1252 | 3.03 | 1-9/32” (1.2813) |
**Negative Adjustment is when swaging stud is sunk completely into, and flush with end of receiver till the receiver bottoms out onto the cable.
| Recommend Longest Run For 3/8 Cable | |
| 38BC-R1232 | 15ft |
| 38BC-R1242 | 40ft |
| 38BC-R1252 | 60ft |
If using a Cable Pre-Tensioner and swaging one side in the field you should be able to double the length of the cable span.