Invisiware Receiver Part # 38BC-R1232
FABRICATION OF NEW CABLE
- Measure rail from outside of termination post to outside of termination post.
- Subtract Take off from chart below depending on style of cable.
- Cut cable to length.
- Swage fittings onto cable.
**NOTE** Position the (threaded) stud onto the cable as shown.
SLIGHTLY LESS THAN CABLE DIAGRAM
Part (Side A) | Part (Side B) | Take Off |
38BC-R1232 (2.03” LONG) | 38BC-R1232 (2.03” LONG) | 11/16 |
38BC-R1232 2.03” LONG) w/ Beveled Washer |
38BC-R1232 (2.03” LONG) | 5/16 |
38BC-R1232 (2.03” LONG) w/ Beveled Washer | 38BC-R1232 (2.03” LONG) w/ Beveled Washer | Add 1/16 |
Single Side Take Off | |
Part | Take off |
38BC-R1232 (2.03” LONG) | 5/15 |
38BC-R1232 (2.03” LONG) w/ Beveled Washer | Add 1/16 |